Advantage Arms for Gen 4 Glock 17/22/31/34/35 Conversion Kit 22LR w/ Bag AAC17-22

1.  ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK style sights. The rear sight is adjustable for both windage and elevation.

2.  LAST ROUND LOCK OPEN

The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on ‘Advantage Arms’ .22LR Conversion Kits for the GLOCK pistol.

3.  INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.

4.  FINISH All
Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat
treated 416 Stainless Steel.

5.  THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in
your GLOCK owner’s manual. Now slide the “Advantage Arms” slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot.

This procedure can be accomplished in less than 10 seconds with some practice.

——————————-

COMPATIBILITY OF OUR CONVERSION KITS FOR GLOCK PISTOLS

Our Conversion Kits are made to work on FACTORY STOCK Glock frames.

Note:  Aftermarket
parts such as trigger bars and connectors, especially the Ghost Connector, can adversely affect the function and reliability of your conversion kit.

FACT:  You will have
paid for your ADVANTAGE ARMS, INC. conversion kit after shooting 1000 rounds of .22LR.

Will your kit work on my Polymer 80% or aftermarket frame?

No, The Advantage Arms conversion kit for the Glock pistol is designed to fit and function on factory stock Glock receivers. Our kits were not designed for, nor do we indorse, using them on the Polymer 80% or any other aftermarket receiver.